-
Shop opening times:
Mon-Fri 10.30am-6.00pm | Sat 10.00am-5.00pm
- Home /
- Environment Control /
- AromOzone AZ213 Ozone Generator 12"
Details
The AromOzone AZ213 is a single electrode cold cathode Ozone generator suitable for a 12" ducting system. The electrodes runs at a stable temperature of 20.1 degrees C and the transformer at 20.8 degrees C.
Our devices work at 100% humidity a situation we hope you wont face in your environment. We are able to spray our devices directly with water and know that no degradation will occur. Any moisture in an environment will be drawn down to focal points and taken away out of the environment.
The AromOzone AZ-213 ozone generator will treat all odors being exhausted by a 12" ventilation system. The AromOzone AZ-213 is intended to fit inline in to your ducting system and although it is designed to fit a 12" fan only, it is possible to duct up from a 4, 5 or 6" fan to fit, however we would strongly advise any customer from ducting down on this model, rather they should buy the appropriate Aromozone solution.
The Aromozone inline solution must only be operated when the fan is switched on and requires a minimum of 10 meters of ducting before expelling outside of the environment to allow ozone to breakdown. We would advise always to run these systems on half power to establish needs then if only required, turn to full power if odors or mould is increased. Eliminates odor, mould, bacteria, smoke as well as other pathogens. Comes with full usage instructions.
Our devices work at 100% humidity a situation we hope you wont face in your environment. We are able to spray our devices directly with water and know that no degradation will occur. Any moisture in an environment will be drawn down to focal points and taken away out of the environment.
The AromOzone AZ-213 ozone generator will treat all odors being exhausted by a 12" ventilation system. The AromOzone AZ-213 is intended to fit inline in to your ducting system and although it is designed to fit a 12" fan only, it is possible to duct up from a 4, 5 or 6" fan to fit, however we would strongly advise any customer from ducting down on this model, rather they should buy the appropriate Aromozone solution.
The Aromozone inline solution must only be operated when the fan is switched on and requires a minimum of 10 meters of ducting before expelling outside of the environment to allow ozone to breakdown. We would advise always to run these systems on half power to establish needs then if only required, turn to full power if odors or mould is increased. Eliminates odor, mould, bacteria, smoke as well as other pathogens. Comes with full usage instructions.
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
Write Your Own Review
Newsletter sign-up
Sign Up for Our NewsletterFollow us on
about store
Find us: 13 Delacourt Road, London SE3 8XA
Our opening times
Mon-Fri: 10.30am-6.00pm
Saturday: 10.00am-5pm
Sunday: closed
- Phone: 020 8858 3503
- Email: info@hydrozoneuk.com