Air Cooled Supernova 6" 1000w

The Air-cooled Supernova Reflector is designed for use with any HPS or MH lamp. Simply hang the reflector over the centre of the grow-space at an appropriate height using easy rolls or jack chain. Holding your lamp with a clean cloth insert it into the E40 bulb-holder in the Air-cooled Supernova Reflector and screw it in very firmly. Plug the lead into an appropriate ballast for HPS/MH type bulbs or an IEE (kettle type) mains lead for fluorescent type bulbs and switch on. The Air-cooled Supernova can be used as a standard non-air-cooled reflector as long as glass is not fitted. To air-cool your supernova reflector, an extraction fan (6-inch / 150mm recommended) should be connected to one flange on the reflector via 6-inch (150mm) ducting. The other 6-inch (150mm) flange can be run to a fresh-air intake or hot-air exhaust via 6-inch (150mm) ducting. Air-cooled Supernova Reflector Length: 17-inches (440mm) Air-cooled Supernova Reflector Width: 24-inches (590mm) Air-cooled Supernova Reflector Depth: 7-inches (170mm)